Connect the whole installation.
Data path
Windows Studio → Ethernet switch → Art-Net node → LED fixtures. The phone sends control commands to Studio; it does not replace the computer or Art-Net node.
Network preparation
Choose the correct physical Ethernet adapter and node addresses. Keep the computer and nodes on the intended subnet. Use explicitly configured unicast routes for larger projects. Do not switch networks automatically during a show.
Plan for the actual load
Plan for the number of universes, node port capacity, pixel channel profiles and an output rate of 10–40 FPS. At 4,096 universes and 40 FPS, one 1 GbE link is insufficient. Test the actual hardware and network before commissioning.
When data stops
A successful UDP send does not confirm that the LED fixtures received the data. Record the node’s hold-last-look or fail-safe behaviour during installation acceptance.